PRHTS PIR WITH HUMIDITY & TIMER OVERRUN MODULE FOR ICON LV FAN (72574201)

The module concept which is unique to iCON, gives one the option of determining how you wish to control your fan and based on your requirement select the appropriate module. The same module is compatible with all three size iCON’s – 15, 30 and 60. However, it should be noted that there are specific 240V modules and different low voltage SELV modules. Replacing a module is also a lot simpler and cheaper than replacing the entire fan. This motion and humidity sensor and run on timer module (72574201) is for use in the 12V iCON 15S (72683701) iCON 30S (72683801) only. This module will give the iCON the functionality of being activated by movement in the room, once the movement stops then the run on timer is activated for the period of time it has been set for. The module comes factory set for approx 15min run on time as set by the English Building Regs. The humidity function is activated by a rise in the level of humidity the module can be adjusted to suit but does come factory set out of the box to function for most wet room applications. When the humidity level is triggered the fan will come on and extract the moist air, it will carry on extracting until it is below the humidity level set on the module, this is to prevent nuisance triggering. Where the run on timer is satisfied but there is still moisture present in the air then the fan will carry on running until the humidity sensor is satisfied.

• iCON 12V Plug-In Module
• Run On Timer Allows The Fan To Run On, Once Movement Has Stopped
• The Motion Sensor Or Humidity Sensor Activates The Fan
• For Use In An iCON 15, iCON 30 and iCON 60
• Modules Can Be Changed Without Having To Change The Fan
• 12Volts