Warmup 140W Foil Heater 10m², WLFH-140W/1400
- Foil layer acts a continuous earth layer within the floor construction whilst also diffusing the heat evenly
- Installed directly under the floor finish; no self leveling required
- Ideal for regular shaped rooms, where the 0.5m wide mats can be rolled out across the floor in parallel runs.
- Ideal for heating under laminate, engineered wood and other floating floor finishes
- BEAB Approved and CE marked meeting the highest safety standards for ultimate piece of mind
£349.35
Incl. VAT. £419.22
In stock
Description
The Warmup Foil Heater is an electric underfloor heating system for laminate, engineered wood and other floating floor finishes. The Foil heater is fitted between the insulating layer and the floating floor deck, adding negligible height to the installation.
The Warmup Foil Heater is an electric underfloor heating system for laminate, engineered wood and other floating floor finishes. The Foil heater is fitted between the insulating layer and the floating floor deck, adding negligible height to the installation.
Glued parquet flooring, carpets, vinyls and other resilient floor finishes can be laid over the Warmup Foil Heater by using our Dual Overlay system to create a thin floating floordeck.
If homeowners wish to refurbish their rooms in the future, the floating floor finish installed over the foil heater can be easily lifted and replaced with a new finish if desired.
Technical Specifications
- Operating Voltage: 220 – 240V: 50Hz
- IP Rating: IPX7
- Width: 500mm
- Mat Thickness: 3mm
- Cable Thickness: 1.8mm
- Output Rating: 140W/M²
- Insulation: ETFE
- Min. Installation Temp: 5°C
- Connection: 3M Long "Coldtail" Connection
- Tape not included
Details
SKU | WLFH-140W/1400 |
Availability | In stock |
EAN | 5034526001192 |
---|---|
IP Rating | IPX7 |
Size | 10m² |
Wattage | 140W |
Length | 20m |
Brand | Warmup |