Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A

Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A

- Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A
- The operating ON/OFF Handle is retractive sliding back into the enclosure when not in use.
- Retractable operating handles which drive over center mechanisms incorporating powerful operating springs.
- Units are fitted with HRC fuseinks of maximum rating but will accept fuselinks of a lower rating.
- They can also be converted into Switch Isolators by fitting 3 x 100MLK Solid Copper Switch Links. 

The Eaton 103GNC Glasgow Triple Pole Metal Fused Switch Disconnector - 100A is designed for distribution board. This Fuse Switch can be de-rated by fitting with lower amperage HRC Fuses of the TCP range of fuses from SD5 TCP type from TCP10, 16, 20, 25 32, 40, 50, 63 & 80amps. It is fitted with HRC fuse links of maximum rating but will accept fuse links of a lower rating. The Fused Switch Disconnector is suitable for fuse links SB3, SB4, SO and SD5.

Features: 
- Current Rating: 100 Amp.
- SPSN and TPSN indicate switched neutral.
- Suitable fuse links SB3, SB4, SO and SD5.
- Neutral makes first break and last.
- Type: Fuse Switch Disconnector.
- Number of Poles: Three Pole and Neutral.
- Voltage: 415 Volt.
- Supplied with: Eaton MEM 100SD5 fuse.
- Terminal capacity 50mm2.
- Surface mounted in a metal enclosure.
- Ingress Protection Rating: IP41.
- Brand: Eaton.

Dimensions: (H)327 mm x (W)275 mm x (D)180 mm.