Hager JK11004S Four Pole Main Switch 3 Phase Disconnector Incomer Kit 100A

Hager JK11004S Four Pole Main Switch 3 Phase Disconnector Incomer Kit 100A

- The screws are fully turned down for simple and fast cabling.
- Earth and neutral bars are positioned for easier cabling.
- No spacers are needed to mount boards, cableways, or extension boxes.
- Removable door and front cover for ease of fitting.
- Suitable for use with Hager 3 Phase 100A Distribution Boards.

The Hager JK11004S is designed to help electrical installers meet the challenges of a modern installation. They are available in 100A ratings. The kit consists of a switch disconnector, an incoming shield, incoming links, carp nuts, and a caged terminal. Installing the boards is fast and simple. There is generous space at the top, bottom, and sides of the board for cable bending radii, and twin and earth neutral bars allow easy identification of earth and neutral conductors with the corresponding line conductors. No spacers are required to mount boards, cableways, or extension boxes. Boxes can be mounted at the top or to either side of the board. Trunking and cable entry facility means there is no need to use paxillin. Cable protection is built into the endplate cable entry. It is suitable for use with Hager 3 Phase 100A Distribution Boards.

Features:

- Screws on earth and neutral bars need fewer turns to fit the cable.
- Unique trunking entry system – no need for paxillin.
- Cable protection is built into the endplate cable entry.
- Metering fitted next to incomer / within the board.
- Wide range of extension boxes for side, top, and bottom.
- Boxes can be mounted at the top or to either side of the board.
- Multiple incomer choices for 100A boards.
- 100A tap-off for board extensions or MCB.
- Optimal cabling space.
- Number of Poles: 4 Pole.
- Type: Switch Disconnector/Connector Kit.
- Current Rating: 100A.