HISPEC HSA/BH/RF10-PRO Single-Circuit Mechanical Heat Detector with Plain Housing

HISPEC HSA/BH/RF10-PRO Single-Circuit Mechanical Heat Detector with Plain Housing

- The detector has a molded self-extinguishing white polycarbonate case.
- Nickel-plated stainless steel wiper contacts connect the detector to the base.
- Inside the case, a printed circuit board holds the signal processing electronics.
- Separate base allows the interchange of photoelectric, ionization, and thermal sensors.
- The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes.

The HISPEC HSA/BH/RF10-PRO Heat Detector has a molded self-extinguishing white polycarbonate case. This detector made by Nickel-plated stainless steel wiper contacts connects the detector to the base. Inside the case, a printed circuit board holds the signal processing electronics. Smoke and heat detector allows for too early detection of a developing fire. The alarm is triggered after detection of visible smoke or after exceeding a certain threshold temperature. The device is equipped with a photoelectric sensor of visible smoke, as well as a rate of rising temperature sensor. The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes.

Features:

- Detects temperature rise with a threshold of 60°C.
- Average detection area: 30 m².
- State of the art detector for highest safety.
- Sealed against backpressure.
- Designed for direct-surface or junction box mounting.
- Supplied with its standard base.
- Operating temperature: - 10 to +50 °C.
- Ambient humidity: < 95%.
- Conform to EN 54-5 standard and CE CPR approved.
- Body Material: Plastic.
- Colour: White.
- Brand: HISPEC.