Once installed within a screed, this system is suitable for any underfloor heating compatible floor finish, which can be easily lifted and replaced as desired without any risk of damaging the heating system.
The slower heat up and cool down time of the IN screed Cable System makes it particularly suited to the creation of a storage heating system.
Can be installed directly on top of the Warmup Cement Coated Insulation boards covered with minimum 50mm screed.
BEAB Approved and CE marked meeting the highest safety standards for ultimate piece of mind.

£29.99

Incl. VAT. £35.99

Unavailable

Description

The Warmup Inscreed Cable System is designed for use within a screeded floor construction. The variable spacing of the cable available during design and installation allows the system power to be tailored to the property's requirements.

The Inscribed Cable system is extremely versatile. Its spacing can be varied to tailor the heat input into a floor to match its required heat load. This makes it ideal for screeds as thin as 50mm laid over insulation when a responsive system is required, as well as thicker, bonded screeds where the floor construction is to be used as a storage heater.

For retrofit installations where the subfloor is already in place, it is recommended that one of the other Warmup Electric UFH Systems is selected based on requirements. They can all be installed directly between an insulation layer and the floor finish layer to create a system with a very quick response to heating demands.

Technical Specifications:

Operating Voltage: 220 – 240V, 50Hz.

IP Rating: IPX7.

Cable Thickness: 6mm.

Average Output Rating: 100 to 210w/M².

Inner Insulation: ETFE.

Outer Insulation: PVC.

Min. Installation Temp: 5°C.

Connection: 3m Long "Coldtail" Connection

Details

SKU	WIS
Availability	Unavailable
Brand	Warmup
IP Rating	IPX7